The following part number is an example for C.I. remanufactured A/C Compressor.
“Nippon Denso 10PA17C with 6 grooves type-C, 5.5 inch diameter
clutch.”
11-2010-63552
11=Category Code
2010=Compressor Code
63352=Clutch Assembly Code +
Coil field connector or compressor
manifold (The last digit)
6=
Number of grooves
3= Pulley
Type, For this particular part is C Type.
(1=A, 2=B, 3=C, 4=D)
55=
Approx. size of pulley diameter in inch with 1/2 inch increments
2
= Represents certain connection types, field coil electrical connector
or
compressor manifold. For this particular part 2 means 2-Pin Connector
with manifold cast #P023(as shown on the
photo)
Category Code
08 = New Compressor with rebuilt clutch.
10 = New Compressor with new clutch.
12 = New Compressor without clutch.
14 = New clutch assembly.
16 = New clutch drive plate.
18 = New clutch coil.
20 = New pulley bearing.
22 = New front head.
24 = New rear head.
26 = New shaft seal.
09 = Remanufactured Compressor with new clutch.
11 = Remanufactured Compressor with clutch.
13 = Remanufactured Compressor without clutch.
15 = Remanufactured clutch assembly.
17 = Remanufactured clutch drive plate.
19 = Remanufactured clutch coil.
21 = Remanufactured pulley bearing.
23 = Remanufactured front head.
25 = Remanufactured rear head.
